Karting1.co.uk

[gokart racer]

Dose any one not the currect tourk setting for the big nut which holds the fixed plate in the cluch .
_________________

[Louis B jtkm]

45lbs/ft
_________________
Mark

[Vaknar]

Do you know where you can find a deep socket which will fit it? Asked in various tool shops, karting shops and Halfords, none have anything. Had to use a monkey wrench and guess the torque. And when it does eventually come undone, the engine goes into direct drive mode.
_________________
TKM BT82 Walbro WB19 Carb Rebuilds + Ultrasonic Clean. £10.75 + return postage, PM me for details.

[Louis B jtkm]

Vaknar

I can,t remember what size socket it is as we don't have a clutched motor anymore.

If it's 30mm then spellfame sell them under rotax tool's if not you'll get one on ebay.

mark
_________________
Mark

[Vaknar]

Ah, didn't think of looking on eBay. Thanks
_________________
TKM BT82 Walbro WB19 Carb Rebuilds + Ultrasonic Clean. £10.75 + return postage, PM me for details.

[gokart racer]

its just a normal socket from a socket set but it dose need to be a long one to reach the nut. its a 24mm sized socket. And thanks fr the torqure settings louis
_________________

[Vaknar]

Yeah that was the problem I had after I bought one from B&Q, needs to be very deep.
_________________
TKM BT82 Walbro WB19 Carb Rebuilds + Ultrasonic Clean. £10.75 + return postage, PM me for details.

[gokart racer]

i got a blue point socket set the 24mm in that dose a boss job.
_________________