| View previous topic :: View next topic |
| Author |
Message |
Alain63
Joined: 18 Apr 2010
Posts: 13
|
 Posted: Fri Jun 15, 2012 2:51 pm Post subject: Clutch problem |
 |
|
Hello,
I've a problem with my Aixro : for the second time, the clutch part in which the bolts with springs are screwed is broken so i've lost one bolt !! I've used this part 4 or 5 times since i bought it a year ago. Clutch discs were changed at the same time. Clutch is working well even if it sticks a little when i slow down to go back to pits.
It may be easier to explain with a picture : 
I want to understand what happened twice before buying this part again. Any explanation ?
Thanks for help.
Alain |
|
| Back to top |
|
 |
kai
Joined: 27 Sep 2006
Posts: 1300
Location: Southeast England
|
| Posted: Sat Jun 16, 2012 10:35 am Post subject: |
|
|
Hi Alain,
I know that some of the contributors best qualified to help on this are away at a race meeting all of this weekend.
Some helpful replies will no doubt be forthcoming in the course of next week. |
|
| Back to top |
|
|
Alain63
Joined: 18 Apr 2010
Posts: 13
|
| Posted: Sun Jun 17, 2012 4:59 am Post subject: |
|
|
| kai wrote: | Hi Alain,
I know that some of the contributors best qualified to help on this are away at a race meeting all of this weekend.
Some helpful replies will no doubt be forthcoming in the course of next week. |
Hi Kai,
Thanks a lot for your message! I'm sure many guys will help to solve this curious problem next week. |
|
| Back to top |
|
|
aixroboy
Joined: 28 Jul 2010
Posts: 80
Location: Stekene Belgium
|
| Posted: Mon Jun 18, 2012 6:22 am Post subject: |
|
|
hello
i have had many clutches but never had this problem and believe me nobody drives as much as we do with the aixro
some things ar e missing in the picture
the springs in the clutch how far where they turned out if you measure from the top of the spring to the side of the clutch ?
how many hours did it do ?
what type of clutch standard or cintermetal ?
when it happens is it in the dry or in the wet?
greets
jurgen |
|
| Back to top |
|
|
Alain63
Joined: 18 Apr 2010
Posts: 13
|
| Posted: Mon Jun 18, 2012 6:45 am Post subject: |
|
|
Hello Jurgen,
Thanks for answer.
The spring height : 8 or 9 mm (setup from the factory)
Hours : cannot remember exactly, less than ten (i think less than 5)
Standard or cintermetal : i suppose you're talking about discs : it's the reinforced model.
It happened in the dry (never use when wet).
Regards.
Alain
| aixroboy wrote: | hello
i have had many clutches but never had this problem and believe me nobody drives as much as we do with the aixro
some things ar e missing in the picture
the springs in the clutch how far where they turned out if you measure from the top of the spring to the side of the clutch ?
how many hours did it do ?
what type of clutch standard or cintermetal ?
when it happens is it in the dry or in the wet?
greets
jurgen |
|
|
| Back to top |
|
|
aixroboy
Joined: 28 Jul 2010
Posts: 80
Location: Stekene Belgium
|
| Posted: Mon Jun 18, 2012 8:22 am Post subject: |
|
|
next week i am at llandow for the aixro race do you think you can arrange the clutch to be there so i can see it
greets
jurgen |
|
| Back to top |
|
|
aixroboy
Joined: 28 Jul 2010
Posts: 80
Location: Stekene Belgium
|
| Posted: Mon Jun 18, 2012 8:22 am Post subject: |
|
|
sorry race is already this weekend
 |
|
| Back to top |
|
|
kai
Joined: 27 Sep 2006
Posts: 1300
Location: Southeast England
|
| Posted: Mon Jun 18, 2012 8:28 am Post subject: |
|
|
I don't think Alain is in the UK, Jurgen: I seem to recall that he is in France.
See you this weekend! |
|
| Back to top |
|
|
Alain63
Joined: 18 Apr 2010
Posts: 13
|
| Posted: Mon Jun 18, 2012 8:30 am Post subject: |
|
|
I live in the south of France, it may be another problem !!
 
| aixroboy wrote: | sorry race is already this weekend
|
|
|
| Back to top |
|
|
aixroboy
Joined: 28 Jul 2010
Posts: 80
Location: Stekene Belgium
|
| Posted: Mon Jun 18, 2012 10:50 am Post subject: |
|
|
did you already asked your dealer where you bought the engine about the problem
i am at aixro next week i will ask about yuor problem you can buy only the front disk to repair it but myself have never seen it before
greets
jurgen |
|
| Back to top |
|
|
Alain63
Joined: 18 Apr 2010
Posts: 13
|
| Posted: Mon Jun 18, 2012 2:16 pm Post subject: |
|
|
Jurgen,
I've completely disassembled the clutch a few minutes ago and noticed that the broken part can play a little around the clutch drive hub with toothing(name given to this part in the part list). I don't know if it's normal. Maybe that's enough to break the part...
About the dealer where i bought the engine : let's talk about someone else...
Alain
| aixroboy wrote: | did you already asked your dealer where you bought the engine about the problem
i am at aixro next week i will ask about yuor problem you can buy only the front disk to repair it but myself have never seen it before
greets
jurgen |
|
|
| Back to top |
|
|
aixroboy
Joined: 28 Jul 2010
Posts: 80
Location: Stekene Belgium
|
| Posted: Tue Jun 19, 2012 6:51 pm Post subject: |
|
|
alain
send me some pictures so i can see
kartpower@telenet.be
greets
jurgen |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
