| View previous topic :: View next topic |
| Author |
Message |
arm201

Joined: 04 Mar 2012 Posts: 7
|
Posted: Mon Mar 05, 2012 7:46 am Post subject: Vertical kart stands |
|
|
Hi ,
Does anybody keep their Rotax in a vertical stand ....?
Are there any problems or downsides to storing karts like this ...?
Thanks in advance. |
|
| Back to top |
|
 |
kai

Joined: 27 Sep 2006 Posts: 1265 Location: Southeast England
|
Posted: Mon Mar 05, 2012 7:49 am Post subject: |
|
|
| Yes and no problem |
|
| Back to top |
|
 |
Louis B jtkm
Joined: 30 Nov 2011 Posts: 183 Location: Yate
|
Posted: Mon Mar 05, 2012 9:36 am Post subject: |
|
|
The problem i encountered if you leave the engine on when storing upright is if you leave the fuel pipe connected it will fill the engine and exhaust up with fuel.
so if storing upright disconnect the fuel line and drain the carb.
Mark |
|
| Back to top |
|
 |
GlennTKM23

Joined: 08 Jul 2009 Posts: 587 Location: Leicester
|
Posted: Mon Mar 05, 2012 2:19 pm Post subject: |
|
|
If you have an OTK kart it will ruin the brakes apparently. _________________ #23
2010 Tonykart Viper/TM k11b/IAME Parilla X30/TKM BT82
www.glennguestracing.co.uk
 |
|
| Back to top |
|
 |
jwb_moto
Joined: 25 Dec 2006 Posts: 167 Location: Peterborough
|
Posted: Mon Mar 05, 2012 2:27 pm Post subject: |
|
|
you should be ok with any otk brake system if you keep pressure on the caliper by putting a cable tie between the pedal and the front upper rail. _________________ www.kartgraffix.co.uk
 |
|
| Back to top |
|
 |
kevinh24
Joined: 07 Apr 2011 Posts: 433 Location: east sussex, camber
|
Posted: Mon Mar 05, 2012 3:25 pm Post subject: |
|
|
i have up right stand, all i do is drain carb and fuel tank of petrol and thats it stays upright till next time i use it, i have never had any problems,
haerd about cable tieing the brake up but i never have and never had a problem,
i always mean to cable tie them up in case but i always forget  _________________

Last edited by kevinh24 on Mon Mar 05, 2012 8:54 pm; edited 1 time in total |
|
| Back to top |
|
 |
arm201

Joined: 04 Mar 2012 Posts: 7
|
Posted: Mon Mar 05, 2012 7:29 pm Post subject: |
|
|
| Thanks for all the info folks , Its been a big help. |
|
| Back to top |
|
 |
A.Farrell
Joined: 27 Feb 2009 Posts: 293 Location: Hampshire
|
Posted: Mon Mar 05, 2012 7:57 pm Post subject: |
|
|
If you store an otk upright wont it bend anyway?  |
|
| Back to top |
|
 |
|